|
Post by jedi1life on Feb 6, 2008 11:26:53 GMT -5
I personally REALLY want to see
1. TPM Obiwan 2. Dooku ROTS 3 Anakin ROTS 4. TPM Qui Gonn Jinn
|
|
Darth Caedus
Moderator
Dark Lord of the Sith}}Force Power{27687}
Posts: 1,443
|
Post by Darth Caedus on Feb 6, 2008 19:03:29 GMT -5
I want a Vader ROTS, its my favourite saber of all time.
- Dark Anakin
|
|
|
Post by dajoquim on Feb 6, 2008 19:33:13 GMT -5
I want a Vader ROTS, its my favourite saber of all time. - Dark Anakin I second that!!
|
|
|
Post by kypdurron on Feb 7, 2008 11:27:02 GMT -5
I personally REALLY want to see 1. TPM Obiwan 2. Dooku ROTS 3 Sidious ROTS 4. TPM Gui Gonn Those are my picks as well, but I'd also like to see a re-done Anakin AOTC with a more accurate-sized hilt. *Edit* Oh and one more, an Anakin ROTS with a chromed mid band, dang it!! That's the one thing that I hated about the MR Anakin ROTS FX, that aluminum mid band not only made the hilt inaccurate, but it also made it look cheap. -Kyp
|
|
|
Post by fenyxkell on Feb 8, 2008 5:16:09 GMT -5
No one ever asked for a double pair of Grevious ROTS ? In the movie he's wielding 4 sabers when dueling Obi Wan, whom did they belong to ?
|
|
|
Post by dajoquim on Feb 8, 2008 18:59:19 GMT -5
dead jedi.
|
|
Lord Sidious II
Jedi Master
AKA Emperor Sidious}}Force Power{800579}
And so, It begins
Posts: 1,668
|
Post by Lord Sidious II on Feb 10, 2008 10:02:47 GMT -5
No one ever asked for a double pair of Grevious ROTS ? In the movie he's wielding 4 sabers when dueling Obi Wan, whom did they belong to ? If you look at a still, one is actually the same saber Anakin uses in ROTS, one is the same one Obi-Wan uses in ROTS, one is the same Ki-Adi-Mundi uses in ROTS, the last is one Aayla Secura uses in ROTS. The color switches on em too if you watch, the Obi-Wan may start blue the goes green, while the other switch in the same way. Horrible editing job on that. And youd think seeing as the whole character is CGI that they could CGI in some new sabers......
|
|
|
Post by fenyxkell on Feb 11, 2008 4:31:41 GMT -5
I couldn't be more disapointed... Thanks for checking ! But I bet that if they publish a "reedited" version if 20 years or so of ROTS (like they did for the first trilogy), they will problably correct this
|
|
|
Post by darthowner on Feb 13, 2008 7:12:30 GMT -5
Tehre are many bloopers like that in ROTS. when anakin fights obi wan at the end, when they are in the "control room" and choking each other on the floor, obi wan is holding the wrong hilt (anakins).
thats one that is particularly bad.
as for wish list - the episode 1 sabers quigon and obi wan obi wan ANH or just a re-release of the ROTS model
re-re-release of the Luke ROTJ
any other full size green lightsaber. of course the dooku. its been proved possible, so lets see it as a produciton model.
I wouldnt buy it but Id like to see a sidious (im not a fan of the hilt)
and a rehash of the windu with proper purple LEDS and bright blade.
all other re-releases should be updated to the best electronics / blades possible and use all metal parts. no creaky crap.
A re-release of the anakin ep2 would be nice also.
|
|
|
Post by Darthsolvo on Feb 13, 2008 15:59:10 GMT -5
I personally REALLY want to see 1. TPM Obiwan 2. Dooku ROTS 3 Sidious ROTS 4. TPM Gui Gonn agreed
|
|
RamZnation
Moderator
The Galactic Jarhead Jedi
"This is my lightsaber, there are many like it but this one is mine..."
Posts: 1,409
|
Post by RamZnation on Feb 14, 2008 1:35:22 GMT -5
I have seen a Quinlan Vos saber hilt done before. Parkssabers.com sells em for like 300... which is a lot of money for a poor college kid like me XD I would like to see a lot of sabers made really. The three main ones from TPM: Obi Wan, Qui Gon, and Darth Maul. It would be awesome if these were made like ultrasabers are where you can take the blades out. I liked how Maul used his saber with one blade lit on Tatooine... but knowing Hasbro, they'd probably make variants so you gotta get like all of em XD Along with those, I'd like to see a Dooku and a Sidious as well. Uh... other than those, maybe some EU sabers or some generic Jedi sabers... anything cool really lol 300 $ are you serious? well i now want Hasbro to lower that price f they make the lightsaber. ...Not just that. They are EL sabers, not (Luxeon) LED. I still say... Luke Skyawalker's Holiday Special Lightsaber. * With a Cyan color.
|
|
Corran Horn
Jedi Master
}}Force Power{299}
You don't have a soul. You are a Soul. You have a body.
Posts: 483
|
Post by Corran Horn on Feb 20, 2008 6:44:09 GMT -5
...yes they do come out fast don't they..problem.
|
|
Derek Skirata
Jedi Master
{S=22}}}
"Honor is better than power." - Derek Skirata
Posts: 2,657
|
Post by Derek Skirata on Feb 20, 2008 16:40:38 GMT -5
Curious question: What does Darth Bane's lightsaber hilt really look like?
Also why not a Darth Sidious hilt? I know there was a huge demand for Sidious FX sabers.
|
|
|
Post by Allsi Viwes on Feb 21, 2008 2:50:25 GMT -5
Sidious, Dooku, and of course Assaj Ventress(s)
|
|
Darth Nerdold
Jedi Master
There is no try... only do or do not.
Posts: 346
|
Post by Darth Nerdold on Feb 21, 2008 23:11:47 GMT -5
I would just like to see all of the sabers MR did not make (the main ones at least).
TPM: Obi-Wan Kenobi Qui-Gon Jinn
AOTC: Count Dooku Anakin Skywalker (accurate sized)
ROTS: Darth Sidious
ANH: Obi-Wan Kenobi
ESB: none
ROTJ: Darth Vader
|
|