Need Help Wiring Hasbro Qui-Gon To Corbin's Driver

[Darth Simious]

[glow=red,10,000] I'm kind of stuck right now. I am trying to solder a Hasbro Qui-Gon Jinn sound board to Corbin's 3 watt driver. From the information I gathered so far, I have found out that the Hasbro sound boards are all momentary so I am using Corbin's momentary driver. I have made a diagram of how my set up is currently soldered. Currently it will not do anything but I have got it to somewhat work previously. The most I have gotten it to do was light up but there was no sound at all and it stayed on regardless of pressing the on/off switch. Can anyone lend some advice? [/glow]

[dajoquim]

I had the same problem with the old hasbro sound board;but,the new spring action hasbro sound boards are the best to use for some reason.they worked the best for me.

[Darth Simious]

[glow=red,10,000] I've had an Obi-Wan, Anakin ROTS, Qui-Gon, and the build your own sabers for a while now. I ended up with and empty MHS hilt and Corbin's board so I figured I would put them to good use. It's turning out to be a real pain but now I've become obsessed with just getting the thing to work right. I can't seem to find anyone who has a diagram or can recollect how the connect the wires unfortunately. [/glow]