Post by account_disabled on Nov 17, 2017 4:42:46 GMT -5
Hello Guys,
And im trying to develop a dc circuit that will create a pulsing effect in the LED to create the "glow/alive effect" of the sabers in the movie. Keeping in mind a long term project goal of adding in a clash sensor and sound device that works congruently and possibly a second "bright flash" LED. I followed all of the steps in the appropriate saber conversion post and everything works, but my LED isn't lighting up. A Corporate Video Examples can be an added value to your sales funnel and also a great marketing collateral. I rewired the LED and the wiring harness twice each to be sure I was getting it wired correctly. And I also tested the LED every step of the way prior to connecting it to the wiring harness and everything works, but once I hook it up to the harness and plug it in to the board, the LEDs don't light up anymore.
Thanks
And im trying to develop a dc circuit that will create a pulsing effect in the LED to create the "glow/alive effect" of the sabers in the movie. Keeping in mind a long term project goal of adding in a clash sensor and sound device that works congruently and possibly a second "bright flash" LED. I followed all of the steps in the appropriate saber conversion post and everything works, but my LED isn't lighting up. A Corporate Video Examples can be an added value to your sales funnel and also a great marketing collateral. I rewired the LED and the wiring harness twice each to be sure I was getting it wired correctly. And I also tested the LED every step of the way prior to connecting it to the wiring harness and everything works, but once I hook it up to the harness and plug it in to the board, the LEDs don't light up anymore.
Thanks