|
|
Post by Force FX 28 on Feb 20, 2008 21:39:45 GMT -5
ok this is a remake of my old post because i posted it in a wrong area. ok
Im might convert my obi wan force fx to a luxeon ultrasaber but i have no clue at all how this works. So i need to know like how it all works, is it like u ship it to the ultra sbaer company? or u buy the kit? or wut? some1 plz giv a huge tutorial on how this works. ty
|
|
|
|
Post by Aluke123 on Feb 21, 2008 1:15:08 GMT -5
Did you try reading at all before posting this?
Honestly, you can get the DIY kit and convert the saber yourself or you can send it to Alex and have him convert it. How is that complex?
|
|
|
|
Post by Force FX 28 on Feb 21, 2008 18:24:26 GMT -5
who is alex? and how do i ship it? i dont have the brown bx anymore, and i dont have the syrofoam in the box anymore, also how much will sending it to him cost?
|
|
|
|
Post by Aluke123 on Feb 21, 2008 18:58:04 GMT -5
Alex is the owner of Ultrasabers. Browsing their website would tell you that in about 2 seconds.
To ship it, you break the blade off and throw the saber in a box and mail it. Shipping cost will be determined by the weight of the box and the shipping type you choose.
|
|
|
|
Post by Force FX 28 on Feb 23, 2008 16:54:06 GMT -5
so u want me to break my blade off, ad mail it to them? and when they mail it back itll be in a long box and itll be converted to an ultra saber? how long will it take to get it back?
i checked the site, it said u have to pay $80 to mail it in and have them convert it, and if you want a new blade u have to buy one for another 20 bucks! so i wont have to break my blade off, but wut kind of box should i use then? my original brown master replicas box? abd put a note in there that says, i want it to be blue, a new blade and same sounds even tho i already said that on the site?
|
|
|
|
Post by Aluke123 on Feb 24, 2008 1:30:48 GMT -5
Honestly, how hard is it to ship something? It doesn't matter what kind of box you use. Just pad it well and ship it. They will then ship it back converted. If you don't want to pay the 20something for a new blade, ship it to them with the stock blade still attached. Alex will replace the stock diffuser with Ultrafilm. If you want a better, brighter, and more durable blade, get the upgraded one and break the blade off before shipping. It isn't rocket science  |
|
|
|
Post by Force FX 28 on Feb 24, 2008 11:52:57 GMT -5
ok, so if i break the blade off, and then ship the handle only, it'll come back with a blade and converted into the color i want right. and i still have to confirm the mail in at the site. and was i right about paying 80 bucks to get it converted? answer all 3 questions plz
|
|
|
|
Post by Aluke123 on Feb 24, 2008 16:19:12 GMT -5
1)No, if you break the blade off you will need to buy a new blade, but that new blade will be brighter and stronger. 2)Yeah you still need to order the mail in conversion off the site...I don't see how you got the impression you didn't. 3)Yes, you need to pay 80 bucks. It's 100 if you break off the blade to mail it to them, because you need to get a new blade. These questions could all be answered by a little READING, so basically  |
|
|
|
Post by Force FX 28 on Feb 27, 2008 14:14:20 GMT -5
dang it! its 100 bucks, o well i guess i wont convert for a long time
|
|
|
|
Post by Master Mac on Feb 28, 2008 18:10:15 GMT -5
Force FX 28, you wouldn't possibly be howie from the FX-Sabers Forum, would you?
|
|
|
|
Post by Outer Rim Armory on Feb 29, 2008 0:58:32 GMT -5
I am not even touching this one. If you have the mental capacity to surf the ultrasabers site, then it should be painfully obvious to you how much things will cost. Every single one of these questions can be answered at the following link. www.ultrasabers.com/kb_results.asp?all=YIt's all just a few mouse clicks away  |
|
