|
Post by Master Lan on Jan 4, 2008 2:58:34 GMT -5
woa
|
|
|
Post by jedibrody on Feb 15, 2008 16:43:38 GMT -5
hey guys this is my first post here and i have always wanted a force fx lightsabre but they were always to expensive for me but i have found that they have lowered, but i dont know what one to get all three are in this link www.play.com/Gadgets/Gadgets/3-/130200/2-/Promo.html?dpr=130200i am leaning towards the vader one because vader is my fave but could you guys tell me what the brightest, best made,coolest etc out of the three is thanks in advance brody
|
|
Garyn Fett™
Admin
}}Force Power{500}
Sanity is never an option, and it never has been.
Posts: 3,022
|
Post by Garyn Fett™ on Feb 15, 2008 18:43:25 GMT -5
Yoda, from what I've seen, is the brightest, but also the lightest of the hilts. The Vader is one of the heaviest, but is dull in comparison to the Yoda, though that may just be how the human eye sees the green vs red light.
And welcome to the forum.
|
|
|
Post by fenyxkell on Feb 15, 2008 21:24:03 GMT -5
Yoda is brightest because it has just as many leds as the others FX (i.e 64 leds) but on a shorter blade, so the space between each led is smaller, resulting in a more intense light. And yes, since it is green, it looks also brighter to human eyes. So with both of these, it makes really a bright blade. The sound is also very loud on the yoda (I can't hear my darth maul if the yoda is on). It has a really light blade and a light hilt. Only is problem is the hilt itself, which is not really confortable for the hand (so small) and also as far more plastic part than a maul ore an obiwan for instance, which doesn't look quite as good thus. The blade is not only shorter but also thinner. And the clash detection is less sensitive, you have to hit it quite hard to make it sound as a clash.
|
|
|
Post by jedibrody on Feb 16, 2008 6:30:15 GMT -5
what about luke`s sabre is that any better than vader?
|
|
|
Post by dajoquim on Feb 16, 2008 12:29:05 GMT -5
Luke's saber is pretty cool to me!!!
|
|
RamZnation
Moderator
The Galactic Jarhead Jedi
"This is my lightsaber, there are many like it but this one is mine..."
Posts: 1,409
|
Post by RamZnation on Feb 16, 2008 14:36:18 GMT -5
what about luke`s sabre is that any better than vader? Not sure which Luke you are refering to, but both the ROTJ and ANH are light.
|
|
Darth Nerdold
Jedi Master
There is no try... only do or do not.
Posts: 346
|
Post by Darth Nerdold on Mar 4, 2008 23:25:48 GMT -5
Personally, I think that the Anakin ROTS is the best overall saber compared to the rest. I've had trouble doing some of my spins with the Luke ANH.
|
|
|
Post by b1b3r on Apr 3, 2008 11:30:17 GMT -5
Hii
Could somebody tell me how long the complete Darth Maul saber is?
Thank you
Fabian
|
|
|
Post by mastersemaj on Apr 9, 2008 15:48:32 GMT -5
The Darth Maul Dual Bladed is 7'.
Also, if anyone has the Anakin Ep II saber, I bought one on e-bay and it came with low batteries and no instruction manual and the battery compartment isn't a twist off bottom as my other 8 sabers are. Can anyone scan the instructions for me so that I don't destroy the thing trying to change the batteries?
|
|
|
Post by Darth Wolfanisius on May 31, 2008 22:10:42 GMT -5
i have a crack in the blade of my luke rotj does anyone know of anywhere that i can get it fixed?? i could really use some help. thanx!!
|
|
Garyn Fett™
Admin
}}Force Power{500}
Sanity is never an option, and it never has been.
Posts: 3,022
|
Post by Garyn Fett™ on May 31, 2008 23:40:01 GMT -5
i have a crack in the blade of my luke rotj does anyone know of anywhere that i can get it fixed?? i could really use some help. thanx!! That one's tougher than normal. I'd suggest getting it converted, personally.
|
|
|
Post by Adenn Corvick on May 31, 2008 23:54:04 GMT -5
i have a crack in the blade of my luke rotj does anyone know of anywhere that i can get it fixed?? i could really use some help. thanx!! Well, unless you can find a spare part over the internet, and take the saber apart and fix it yourself . Its gonna be very tough, now if its Ultrasaber conversion it would be easy, just buy a new UltraFilm blade and slip it in. ;D
|
|
|
Post by Darth Wolfanisius on Jun 2, 2008 0:53:28 GMT -5
where do I find Ultrafilm blades, how much do they cost, and how do I change it out??
my luke is not an Ultrasaber, so can i still use a ultrafilm blade?
|
|
Darth Valrum
Jedi Master
}}Force Power{49994}
"Some decisions are made by destiny, Some decisions are made by choice."
Posts: 781
|
Post by Darth Valrum on Jun 7, 2008 10:02:13 GMT -5
I got Lukes saber from ANH, and i love it.
Although the blade is blue, is there any way i could possibly change it to something like red? or yellow?
|
|