RamZnation
Moderator 
The Galactic Jarhead Jedi
"This is my lightsaber, there are many like it but this one is mine..."
Posts: 1,409
|
Post by RamZnation on Jul 5, 2007 1:29:50 GMT -5
More than likely, I did buy used. It just struck me as something weird as the guy that sold it to me, had the OG box which said it was an ROTS. I'm going to change my SIG/TAG saber to an ATOC vice the ROTS.
|
|
|
|
Post by alkaline41 on Jul 10, 2007 19:39:22 GMT -5
Hey everyone,
I'm hoping this hasn't already been asked but I just got my very first saber today. It's an Obi Wan ROTS. I saw in the FAQ's that people have asked about a dark spot in the middle of their anakins and being able to see the spaces inbetween the leds. Is that only in the anakins? Don't get me wrong the saber is beautiful but if i look closely i can definately see horizontal lines all throughout the blade. There's even a couple specks on the blade that looked like it could just be dust on the outside or something but it didn't wipe off. Can someone tell me if i'm just being too picky or if i should take this one back?
|
|
|
|
Post by bugdozer on Jul 12, 2007 6:34:06 GMT -5
My Obi Wan has that too, the blade looks pretty much the same as the Anakin one. I would not worry about it unless the dark spots are very pronounced - the difference between the normal dark spot and a blown LED is usually fairly easy to tell. The normal dark spot is also nearly exactly half way up the blade.
|
|
|
|
Post by Darth Simious on Jul 21, 2007 12:41:26 GMT -5
Wow, I have 2 Master Replica sabers and have never had any problems with them at all.
|
|
RamZnation
Moderator
The Galactic Jarhead Jedi
"This is my lightsaber, there are many like it but this one is mine..."
Posts: 1,409
|
Post by RamZnation on Jul 21, 2007 12:44:40 GMT -5
When the LED is out on the saber it will definatley be noticable. If it's just a little dark spot on the blade then you should have nothing to worry about.
|
|
Freedon nadd
Jedi Master
"i shall reign over all and this empire will be shrouded in shadow"
Posts: 424
|
Post by Freedon nadd on Jul 21, 2007 13:00:59 GMT -5
need help with mace the is a blackout in my mace at the top light the led lights went out but i shook it a little and the worked but wen i stoped the went out do i have to tighten them or something need help anyone
|
|
|
|
Post by Darth Simious on Jul 31, 2007 2:14:18 GMT -5
|
|
Pending
Moderator 
Pending.
Posts: 344
|
Post by Pending on Aug 5, 2007 2:14:04 GMT -5
Well, i'm sure this will help very people. Good find Master Fisto!  Thanks,but not quite a find,I wrote the article myself. Wow, man you wrote this yourself? Not that anyone cares, but I am highly highly impressed  |
|
Oblivion
Jedi
"Fear. Fear Attracts The Fearful. The Strong. The Weak. The Innocent. The Corrupt. Fear Is My Ally."
Posts: 70
|
Post by Oblivion on Aug 20, 2007 9:07:41 GMT -5
Hey, I have a question to ask, I'm not sure if it goes here but ah well,
Anyways.. I am looking to buy a Maul Double (or 2 single) FX blades, but i want a PURE RED saber, often in vids i either see a deep orange or a very light red (pink), now if i was to choose id probarbly choose the pinkish one because it looks more maul-ish, well anyway back to the question, Are the maul blades really like this (orange/pink)? or is it just the camera and you get a pure red blade.\
P.S. I also heard some maul sabers have REALLY low battery times (30 mins before needing new bats), if you can answer this, PLEASE DO! ;D
|
|
|
|
Post by Outer Rim Armory on Sept 7, 2007 15:31:49 GMT -5
Hey, I have a question to ask, I'm not sure if it goes here but ah well, Anyways.. I am looking to buy a Maul Double (or 2 single) FX blades, but i want a PURE RED saber, often in vids i either see a deep orange or a very light red (pink), now if i was to choose id probarbly choose the pinkish one because it looks more maul-ish, well anyway back to the question, Are the maul blades really like this (orange/pink)? or is it just the camera and you get a pure red blade.\ P.S. I also heard some maul sabers have REALLY low battery times (30 mins before needing new bats), if you can answer this, PLEASE DO! ;D The Orange and pink tones in photos are tricks of the camera. In person, the blades are quite red indeed. Luxeons get the orange hue in photos even worse than stock MR's. The Mauls do have a tendency to eat batteries, but a good set of rechargables will solve those woes. |
|
|
|
Post by ram on Sept 8, 2007 20:58:34 GMT -5
[glow=red,2,300]Yes This page also helped me. I have that rattling in the hilt you talked about. THANKS again.[/glow]
|
|
|
|
Post by Vader's Butler on Oct 1, 2007 14:53:37 GMT -5
Thank you very much Kit!!
this has been VERY helpful!!!
|
|
|
|
Post by Outer Rim Armory on Oct 4, 2007 12:32:53 GMT -5
Any more questions? If you need help and can't get an answer quickly, shoot me a PM and I'll attempt to help!
|
|
Darth Nerdold
Jedi Master
There is no try... only do or do not.
Posts: 346
|
Post by Darth Nerdold on Dec 4, 2007 18:16:31 GMT -5
My Anakin AOTC FX does not turn on. I'm using E2 Lithium batteries in it and I'm pretty sure it's v2 because of the rubber seal.
|
|
|
|
Post by shinzou on Jan 8, 2008 13:32:35 GMT -5
I jut bought a Maul Saber and Two sets of LEDs don't work, I've had it for two weeks and it worked fine before. I looked into it and 2 wires are severed, and the sound wire is worn. I'm wondering if I should try to take out the end connected to the blade and plug the other end into the hole, but I don't know if it's possible, much less how. Any ideas?
|
|
